| JStamp Development Required
Hardware |
- JStamp module
- Socket board such as JStamp Development
Station and its power supply, or the new JCX system (when it
is available).
- JTAG adapter from Systronix, with the correct
JTAG adapter-to-JStamp cable. The JStamp development station
uses a 100-mil pitch 5x2 50-mil ribbon cable, others use a 5x2
2mm pitch, 1mm ribbon cable. You can also use a Xilinx Parallel
III Cable if you have one. Note that the Systronix JTAG adapter
also emulates the Xilinx Parallel III Cable. You must use the
JTAG port at least for initial JStamp configuration and programming.
- Available PC Parallel Port for attaching
the JTAG adapter. No other JTAG interfaces are available at
this time, you must have a PC parallel port.
- Personal Computer with 32-bit Windows and
a CDROM drive.
|
| A JStamp module, development station,
power supply, JTAG adapter, cables, and CDROM are included in the
JStamp Development Kit. |
|
